Water Cooled Industrial Chiller

Detailed Info

Features of HTIE series (economical industrial chillers):

· R22 refrigerant,

· Hitachi,SANYO, Daikin world famous hermetic scroll compressor,·

· Cast iron pump,

· Stainless steel tank built-in ,

· Door mounted disconnect switch,

· Original Schneider electrical components,

· Standard operating and safety controls

· Ventilated control cabinet

· Mounted Casters

· Indoor operation with Water-proof electrical chamber

· Removable panels for easy service access

· Tank level alarm/switch

Options

· System pump pressure bypass valve

· SS pump

· Copeland/Danfoss/Performer compressor

· Other type refrigerant, R407C, R134A, R410A, R404A, etc.

· Mounted Casters for bigger models

· Plate heat exchanger/Stainless steel shell and tube evaporator

· Dust filter for condenser

· Vibration isolation floor mounts

· Variable speed system pump

· Flow switch

· Remote operating/monitoring panel

· Hot gas by-pass

Parameter table

model			HTIE-3W	HTIE-4W	HTIE-5W	HTIE-6W	HTIE-8WD	HTIE-10WD	HTIE-12WD	HTIE-15WD
nominal cooling capacity		kw	9.45	13.5	15.4	17.7	27	3 0	34	48
nominal cooling capacity		ton	2.693	3.84	4.39	5.03	7.68	8.53	9.95	13.65
max power consumption		Kw	9.45	13.5	15.4	17.7	27	30	11.9	16.25
power source			3PH 380V 50HZ
refrigerant	type		R22
refrigerant	control		thermostatic expansion valve
compressor	type		hermetic scroll
compressor	power	kw	2.7	3.5	4.55	5.2	3.5*2	4.55*2	5.2*2	7*2
condenser	type		finned copper tube + low noise outer rotor fan
condenser	cooing water flow	m3/h	2.1	2.6	3.5	3.6	5.2	6.76	7.9	10.7
	inlet & outlet	inch	1-1/2	1-1/2	1-1/2	1-1/2	1-1/2	1-1/2	1-1/2	2
evaporator	type		copper coil built-in storage tank
	coolant flow	m3/h	1.58	2.3	2.58	3	4.6	6.2	5.85	8.25
	tank volume	liter	60	60	60	90	150	200	200	330
	inlet and outlet	inch	1	1	1	1	1-1/2	2	2	2
pump	power	Kw	0.37	0.37	0.75	0.75	1.5	1.5	1.5	2.25
	max head	m	22	22	30	30	25	25	25	28
	max flow	m3/h	5.4	5.4	8.1	8.2	8.1	13.5	13.5	25.2
safety devices			inner thermostat for compressor motor, over-current relay, high and low pressure switch, flow switch, three phase protection relay, discharge gas thermostat, level switch
dimension	length	mm	850	850	1050	1050	1250	1250	1250	1650
	depth	mm	480	480	550	550	680	680	680	850
	height	mm	1020	1020	1150	1150	1380	1380	1380	1650
weight		kg	125	135	160	180	230	260	330	420

Remarks:

the nominal cooling capacities are based on the following conditions:

a. coolant supply 7C, return 12C, temperature difference 3C to 8C;

b. cooling water inlet 25C, outlet 30C, temperature difference 3.5C to 10C;

If you have any special requirements, please keep us noted.

Specifications, appearances and dimensions are subject to change without notice.