Laser Chiller

You are Here: Product / Air Cooled Chiller / Laser Chiller / Laser Chiller--air Cooled Chiller 50kw To 134kw

Laser Chiller--air Cooled Chiller 50kw To 134kw

Laser chiller--air cooled chiller 50kw to 134kw
  • Laser Chiller
  • Brand:HERO-TECH
  • Model:HTL-20AD,HTL-25AD, HTL-30AD
  • Type:Air-Cooled
  • Certification:CE, UL, Other
  • Cooling Capability(kw):50KW TO 150KW
  • Update Time:03/06/2013
Detailed Info
Specification------Laser chiller---- air cooled

Product introduction

In laser system, laser source and beam controller would need to be cooled. Cooling water is normally required in the range of 15â�� to 22â��, with ±1â�� or ±2â�� accuracy and sometimes within ±0.1â��.  Laser  has  special requirements for conductivity and corrosiveness of cooling water,  normally water loop should be stainless steel materials.


Laser chiller is mainly applied for laser marker, laser engraving machine, laser welder, laser cutting machine, laser ink jet machine, etc., for maintaining required temperature of laser equipment, so to ensure normal running.

Design features

¨      Large volume SS storage tank and SS coil evaporator.
¨      Built-in high pressure stainless steel chilled water pump, ensuring water quality and pressure.
¨      Well-known brand exhaust fan with large volume,excellent heat dissipation and low noise.
¨      Precision filtering device can be offered upon request, including particulate matter filtration and deionizer, ensuring high cooling water quality, extending laser and chiller's service life.
¨       Multi-protection devices: flow switch , water pressure switch, acoustic and optical alarm system.
¨      Protection signal output: water flow alarm signal output, water level alarm signal output, temperature protection alarm signal output, ensuring laser and chiller running safely.

Parameter table 
Model HTL-20AD HTL-25AD HTL-30AD
nominal cooling capacity kw 51.8 59.5 84
power source   3PH  380V-415V  50HZ
refrigerant type   R22
control   Thermostatic expansion valve
compressor type   hermetic scroll
power kw 8.96*2 10.08*2 13.62*2
condenser type   finned copper tube + low noise outer rotor fan
evaporator type   stainless steel tank with copper coil built-in  or Plate heat exchanger
coolant flow m3/h 8.84 10.06 13.6
Tank volume liter 350 350 420
inlet and outlet inch 2 2-1/2 2-1/2
dimension length mm 1950 2150 2150
width mm 950 1050 1050
height mm 1960 2100 2100
weight kg 650 1112 1320

1. norminal cooling capacity according to:
coolant inlet inlet 7C, outlet 12C, temperature difference from 3C to 8C;
cooling air inlet 30C, outlet 38C;
2. chiller should be used under 40C ambient temperature;
3. Specification, appearances and dimensions are subject to change without notice.