RS-TF Range
The RS-TF Range
The Twin Power Pack with frequency control
Screw compressors for larger compressed air demand. Economic and reliable air generation by the RENNER twin compressor system.
A number of approved design features have been implemented. New however is the basic concept which is principally focused on operating reliability and cost effectiveness. In other words: a remarkable benefit to the user. The compressed air unit consists of two identical compressor systems with separate drive motors and separated coolers all of which are integrated in one common silencing canopy.
The RS-TF range is fitted as standard with the intelligent RENNERtronic control and monitoring system.
In addition to the base-load changeover function and integrated direction of rotation control frequency converters for both motors are fitted.
Why frequency control?
-
Energy saving
-
Low-fatigue of material
-
Pressure optimization
-
Reduction of discharge losses
-
Lower power consumption leads to reduced CO2 emissions
Advantages
- Greater operating safety
- The air supply does not depend on one compressor only. This is also true for motors, coolers and other components
- If one compressor stops operating the flow from the other is always at the ready
- Both compressors have delayed starts thus avoiding peak current values
- The twin compressor adjusts itself to the air demand, i.e. if the air requirement is low just one compressor operates
- The integrated base-load changeover switch guarantees that both compressors operate the same number of service hours
- 2-year full performance warranty
Design features
- 2-year full performance warranty
- Compact air ends eliminate pipe-work and links with known sources of problems.
- No separate oil re-claimer tank, no need for pressure test certificates
- Efficient noise-insulated canopy and multiple anti-vibration mountings for minimizing noise and vibration levels when installed.
- Door panels are easily removed allowing easy access to the individual components for servicing.
- Use of standard components made by German brand name manufacturers, maintaining high quality standards and offering flexibility in the event of faults.
- Automatic belt tensioner: ensures long belt life
Type |
free air delivered at |
Motor power |
Dimensions |
Weight | |||
---|---|---|---|---|---|---|---|
7,5 bar |
10 bar |
13 bar |
15 bar |
kw |
W x D x H |
kg |
|
RS-TF 75,0 |
3,69 - 12,30 |
3,14 - 10,48 |
2,74 - 9,12 |
2,49 - 8,30 |
2 x 37,0 |
1511 x 2032 x 2120 |
2015 |
RS-TF 90,0 |
4,35 - 14,50 |
3,91 - 13,02 |
3,33 - 11,10 |
3,02 - 10,06 |
2 x 45,0 |
1511 x 2032 x 2120 |
2065 |
RS-TF 110,0 |
* |
* |
* |
* |
2 x 55,0 |
* |
* |
*on request