RSDK Range
The RSDK Range
RENNER screw compressors on horizontal air receiver with refrigeration dryer
The models in the RSDK ranges presented here are based on RENNER’s standard RS range which was designed for industrial use.
These models also come equipped with a compressed air refrigeration dryer. This is fitted on the housing and its capacity is matched to the respective delivery rate of the compressor.
The entire system is assembled ready for connection and operation.
Contrary to the space required and costs incurred by installing separate compressor and dryer units, this system has major advantages in terms of its installation costs and space requirements.
Standard Tank Sizes
RSDK 3,0 - 9,0 - 250 liter
RSDK 9,0 - 15,0 - 500 liter
RSDK 3,0 - 9,0: 500 liter- air receiver
and galvanized tank optional at an extra charge
RENNER Refrigeration Dryer
The compressed air is delivered to the refrigeration air dryer for conditioning and pre-cooling in the air-to-air heat exchanger.
This pre-cooling process takes place counter-current to the outgoing cool treated air. No additional energy is required for this. The air is cooled further still to the pressure dew point in the refrigerant-to-air heat exchanger which is cooled by a refrigerant circuit.
Throughout the cooling process moisture in the form of condensate is precipitated out and automatically discharged from the system. Before it is emitted, the conditioned compressed air is reheated in the air-to-air heat exchanger by the incoming hot compressed air. RENNER refrigeration dryers are environmentally sound and run on the ozone-friendly refrigerant R134a.
– Serial energy-efficient mode (available from RS 18.5)
– With electronic condensate trap (optional)
If space is limited, these complete and compact compressed air stations are the ideal solution. It saves space and time-consuming assembly on site ! RENNER supplies these systems ready for immediate operation at the place of installation. Just connect the power cable to a suitable supply and an air line to the air discharge valve (both supp
ADVANTAGES AND PLUS FACTORS AT A GLANCE
ADVANTAGES:
- Permanent supply of dry compressed air and high air quality
- No problems or related costs due to condensate build-up in the pipe lines
- Space-saving
- No additional assembly and installation costs
- The refrigeration dryer has the necessary capacity to match the output of the compressor.
PLUS FACTORS:
- 2-year full performance warranty
- Compact and clear layout
- Low-noise and low-vibration design
- Components readily accessible for ease of maintenance
- High-quality standard components made by German brand name manufacturers, guaranteeing quality and prompt supply of spare parts
- Long service life thanks to intelligent design details, such as the automatic belt tensioner or the cooling air system, guaranteeing optimum compressed air temperatures.
Wherever there is a lack of space these complete plants are the ideal solution. Not only saving space but also time and money, these RENNER units come fully interconnected and ready for use; i.e. they only need to be connected to electricity and the air mains at the site.
Type |
free air delivered at |
Motor power |
Receivers |
Dimensions |
Weight | |||
---|---|---|---|---|---|---|---|---|
7,5 bar |
10 bar |
13 bar |
15 bar |
kw |
Liter |
L x B x H |
kg |
|
RSDK 3,0 |
0,41 |
0,32 |
0,24 |
0,21 |
3,0 |
250 |
1413 x 567 x 1435 |
260 |
RSDK 4,0 |
0,56 |
0,46 |
0,35 |
0,30 |
4,0 |
250 |
1413 x 567 x 1435 |
280 |
RSDK 5,5 |
0,77 |
0,65 |
0,53 |
0,45 |
5,5 |
250 |
1413 x 567 x 1435 |
299 |
RSDK 7,5 |
1,10 |
0,95 |
0,74 |
0,63 |
7,5 |
250 |
1413 x 567 x 1435 |
314 |
RSDK 9,5 |
- |
1,09 |
0,86 |
0,75 |
9,0 |
250 |
1413 x 567 x 1435 |
323 |
RSDK 1-11,0 |
- |
1,45 |
1,10 |
0,90 |
11,0 |
250 |
1413 x 567 x 1435 |
337 |
RSDK 11,0 |
1,76 |
1,50 |
1,16 |
0,93 |
11,0 |
500 |
1810 x 664 x 1757 |
488 |
RSDK 15,0 |
2,24 |
1,96 |
1,51 |
1,24 |
15,0 |
500 |
1810 x 664 x 1757 |
506 |