Features of HTI series (standard industrial chillers):
·    CE standard design,
·    R407c, R410A friendly type refrigerant,
·    Panasonic/Hitachi (1/2HP, 1PH, 1.5HP, 2HP), Copeland or Danfoss (3HP to 60HP) world famous hermetic scroll compressor,
·    Domestic or world famous brand Stainless steel pump,
·    Stainless steel built-in tank,
·    Door mounted disconnect switch,
·    Original Schneider electrical components,
·    Standard operating and safety controls
·    Ventilated control cabinet
·    Indoor operation
·    Water-proof electrical chamber
·    Removable panels for easy service access
·    Mounted Casters
·    Tank level alarm/switch, High and Low pressure switch, Inner thermostat for compressor motor, three phase over current protection, compressor overload protection, fan overload protection(air cooled), pump overload protection
·    Shell and tube condenser (for water cooled Industrial chiller)
·    Low noise and high efficiency finned tube condenser (air cooled Industrial chiller)

Options

·    System pump pressure bypass valve
·    SANYO, MANEUROPE, HITACHI COMPRESSOR
·    Other type refrigerant, R22, R404A, R134A etc.
·    Mounted Casters(20HP to 60HP)
·    Plate heat exchanger/Stainless steel shell and tube evaporator 
·    Dust filter for condenser
·    Vibration isolation floor mounts
·    Variable speed system pump
·    Remote operating/monitoring panel
·    Level switch, 
·    Flow switch, 
·    Hot gas by pass, 
·    Anti-freezing protection
·    OEM/ODM SERVICE

 

Parameter table 

Model			HTI-10AD	HTI-12AD	HTI-15AD		HTI-20AD
nominal cooling capacity		kcal/h	23840	26488	53406		44548
		kw	27.72	30.8	41.8		51.8
Max power consumption		kw	11.5	12.9	17.45		21.73
power source			3PH  380V-415V  50HZ
refrigerant	type		R407C
	control		Thermostatic expansion valve
compressor	type		hermetic scroll
	power	kw	4.55*2	5.25*2		7*2	8.96*2
condenser	type		finned copper tube + low noise outer rotor fan
evaporator	type		Copper coil built-in storage tank
	coolant flow	m3/h	4.44	5.03		7.1	8.84
	Tank volume	liter	200	200		270	350
	inlet and outlet	inch	1-1/2	1-1/2		2	2-1/2
pump	max head	m	25	25		28	28
	max flow	m3/h	13.5	13.5		25.2	25.2
dimension	length	mm	1500	1500		1780	1950
	width	mm	760	760		850	950
	height	mm	1660	1660		1800	1960
weight		kg	345	382		580	650

Remarks: 
1.the nominal cooling capacities are based on the following conditions:
coolant supply 7C, return 12C, temperature difference 3C to 8C;
cooling air inlet 30C, outlet 38C;
2. chiller should be used under 40C.
3. Specifications, appearances and dimensions are subject to change without notice.